Temperature-Properties Relationships of Martensitic Stainless Steel for Improved Utilization in Surgical Tools
DOI:
https://doi.org/10.53560/PPASA(60-1)800Keywords:
Sintering Temperature, Sintering Environment, Surgical Parts, Stainless Steel, Powder MetallurgyAbstract
Sintering temperature and environment plays a very important role in strengthening powder particles of compacting surgical parts by cold powder metallurgy technique. Powder metallurgy is a process of producing components/tools by compacting finely metallic or nonmetallic powders. Generally, in the last decade, these tools were produced by conventional casting techniques but now first time in Pakistan this technique is introduced to develop surgical tools/parts. In this study, the effect of sintering behavior by varying temperatures and environments was studied. The AISI 420 Stainless steel compacted surgical parts (Scalpel and scissor) were sintered at 1000 °C to 1300 °C for 30 minutes in a vacuum and an inert environment in the presence of Argon. The compact density, microstructure and mechanical properties were studied. Microstructural characteristics like porosity, and crystalline size were studied by optical microscope. The hardness values and density of the final parts were also measured through the Rockwell hardness machine and by the Archimedes principle. Decreasing the porosity in the final parts will increase the mechanical properties of sintered parts. Adopting the present process for the development of surgical tools after further refining, the process will prove beneficial in the cost-effectiveness, time and energy saving of the present product.
References
G.Y. Liu, B.R. Sun, C.C. Du, S. Li, S.W. Xiu, and T.D. Shen. Hierarchically structured powder metallurgy austenitic stainless steel with exceptional strength and ductility. Materials Science and Engineering: A 861: 144351 (2022).
F. Martin, C. Garcia, and M. Aparicio. Tribocorrosion behaviour of powder metallurgy duplex stainless steels sintered in nitrogen. Tribology International 57: 76-85 (2013).
M. Javanbakht, M.J. Hadianfard, and E. Salahinejad. Microstructure and mechanical properties of a new group of nanocrystalline medical-grade stainless steels prepared by powder metallurgy. Journal of Alloys and Compounds 624: 17-21 (2015).
K. Saeidi, D.L. Zapata, F. Lofaj, L. Kvetkova, J. Olsen, Z. shen, and F. Akhtar. Ultra-high strength martensitic 420 stainless steel with high ductility. Additive Manufacturing 29: 100803 (2019).
M. Javanbakht, E. Salahinejad, and M.J. Hadianfard. The effect of sintering temperature on the structure and mechanical properties of medical-grade powder metallurgy stainless steels. Powder Technology 289: 37-43 (2016).
S.O. Akinwamide, O.J. Akinribide, M. Mafafo, P. Mjwana, B.A. Obadele, B.T. Abe, and P. Olubambi. Effect of TiN addition on corrosion behavior of spark plasma sintered 304L austenitic stainless steel in chloride media. Materials Today: Proceedings 28: 384-387 (2020).
A.N. Acar, A.K. Ekşi, and A. Ekicibil. Effect of pressure on the magnetic and structural properties of X2CrNiMo17-12-2 austenitic stainless steel prepared by powder metallurgy method. Journal of Molecular Structure 1198: 126876 (2019).
K.V.V. Nagaraju, S. Kumaran, and T.S. Rao. Electrochemical behavior of various grade P/M stainless steels processed by rapid microwave hybrid sintering (super-solidus) method. Materials Letters 302: 130394 (2021).
L.H. Heidari, M.J. Hadianfard, A.R. Khalifeh, D. Vashaee, and L.Tayebi. Fabrication of nanocrystalline austenitic stainless steel with superior strength and ductility via binder assisted extrusion method. Powder Technology 379: 38-48 (2021).
S. Pandya, S.R. Kandala, A.R. Annamalai, and A. Upadhaya. Effect of sintering temperature on the mechanical and electrochemical properties of austenitic stainless steel. Materials Science and Engineering: A 556: 271-277 (2012).
W. Shen, B. Nan, W. Wang, L. Yu, Q. Zhang, Y. He, X. Huang, and G. yuan. In situ synthesis and strengthening of ultra high-carbon martensitic stainless steels in addition of LaB6. Journal of Alloys and Compounds 738: 363-371 (2018).
F. Martín, C. Garcia, Y. Blanco, and M. L. R-Mendez. Influence of sinter-cooling rate on the mechanical properties of powder metallurgy austenitic, ferritic, and duplex stainless steels sintered in vacuum. Materials Science and Engineering: A 642: 360-365 (2015).
C. García, F. Martin, and Y. Blanco. Effect of sintering cooling rate on corrosion resistance of powder metallurgy austenitic, ferritic and duplex stainless steels sintered in nitrogen. Corrosion Science 61: 45-52 (2012).
M.R. Raza, F. Ahmad, M.A. Omar, and R.M. German. Effects of cooling rate on mechanical properties and corrosion resistance of vacuum sintered powder injection molded 316L stainless steel. Journal of Materials Processing Technology 212(1): 164-170 (2012).
M.F. Bhutta. Quality of Surgical Instruments. The Annals of The Royal College of Surgeons of England 89(2): 190-190 (2007).
A. Ikram, Q. Su, and M. Sadiq. Technical Efficiency And Its Determinants: An Empirical Study Of Surgical Instruments Cluster Of Pakistan. Journal of Applied Business Research 32: 647-660 (2016).
M. Junaid, R.N. Malik, and D.-S. Pei. Health hazards of child labor in the leather products and surgical instrument manufacturing industries of Sialkot, Pakistan. Environmental Pollution 226: 198-211 (2017).
M.Z. Khan. Pakistan’s shadow surgical instruments’ sector. Report, Dawn/22.08, Business & Finance weekly (2016). https://www.dawn.com/news/1279191(accessed 1 January 2023).
S.S. Amir, and S. Arshad. Enhancing the competitiveness of pakistan’s surgical instruments industry. Report PBC/EDB/SIMAP 1-79 (2022).
U.A. Mufti. The Surgical Instruments Industry of Pakistan is World #1 in Production. Report Bussiness/28.04, Economy.pk (2022). https://www.economy.pk/the-surgical-instruments-industry-of-pakistan/ (accessed 1 January 2023).
C. Berman. Labor standards in Pakistan’s surgical instruments sector: a synthesis report. Ethical Trading Initiative (ETI) UK.
A. Sola, A. Trinchi, and A.J. Hill. Self-assembly meets additive manufacturing: Bridging the gap between nanoscale arrangement of matter and macroscale fabrication. Smart Materials in Manufacturing 1: 100013 (2023).
M. Armstrong, H. Mehrabi, and N. Naveed. An overview of modern metal additive manufacturing technology. Journal of Manufacturing Processes 84: 1001-1029 (2022).
M. Nishal, K.R. Prasad, M.S. Dashageer and A.G. Ragunath. Significance of additive manufacturing amidst the pandemic. Materials Today: Proceedings 72: 2540–2546 (2022).
D. Cui, and J. Wang. Research on Powder Metallurgy High Nitrogen Stainless Steels. Advanced Materials Research 690-693: 172-175 (2013).
F. Martín, C. Garcia, Y. Blanco, and M.L. R-Mendez. Influence of sinter-cooling rate on the mechanical properties of powder metallurgy austenitic, ferritic, and duplex stainless steels sintered in vacuum. Materials Science and Engineering: A 642: 360-365 (2015).
